6M 30W Solar Street Light Ine Gel Bhatiri
| Simba | 30W |   |
| Material | Die-cast Aluminium | |
| LED Chip | Luxembourg 3030 | |
| Light Efficiency | >100lm/W | |
| CCT: | 3000-6500k | |
| Kutarisa angle: | 120° | |
| IP | 65 | |
| Nzvimbo Yekushanda: | 30℃~+70℃ |
| Module | 100W |  |
| Encapsulation | Girazi/EVA/Masero/EVA/TPT | |
| Kubudirira kwemasero ezuva | 18% | |
| Kushivirira | ±3% | |
| Voltage at max power (VMP) | 18V | |
| Ikozvino pamasimba makuru (IMP) | 5.56A | |
| Vhura siketi voltage (VOC) | 22V | |
| Short circuit current (ISC) | 5.96A | |
| Diodes | 1by-pass | |
| Dziviriro Kirasi | IP65 | |
| Shandisa temp.scope | -40/+70 ℃ | |
| Hunyoro hunyoro | 0 kusvika ku1005 | |
| Warranty | PM haisi pasi pe90% mumakore gumi uye 80% mu15 Makore |
| Rated Voltage | 12V | | |
| Rated Capacity | 60 Ah | ||
| Huremu Hunenge (kg, ± 3%) | 18.5KG | ||
| Terminal | Cable (2.5mm²×2 m) | ||
| Maximum Charge Current | 10 A | ||
| Ambient Temperature | -35 ~ 55 ℃ | ||
| Dimension | Hurefu (mm, ±3%) | 350mm | |
| Kufara (mm, ±3%) | 166mm | ||
| Kureba (mm, ±3%) | 174mm | ||
| Nyaya | ABS | ||
| Warranty | 3years | ||
| Rated kushanda voltage | 10A DC12V |  |
| Max. kubudisa ikozvino | 10A | |
| Max. kuchaja ikozvino | 10A | |
| Output voltage range | Max panel / 12V 150WP solar panel | |
| Iko kurongeka kwekugara ikozvino | ≤3% | |
| Constant ikozvino kushanda zvakanaka | 96% | |
| mazinga ekudzivirira | IP67 | |
| hapana-mutoro ikozvino | ≤5mA | |
| Over-charging voltage protection | 12V | |
| Over-dicharging voltage protection | 12V | |
| Buda over-dicharging voltage protection | 12V | |
| Batidza voltage | 2 ~ 20V | |
| Size | 60*76*22MM | |
| Kurema | 168g | |
| Warranty | 3years |
| Material | Q235 |
|
| Urefu | 6M | |
| Diameter | 60/160mm | |
| Ukobvu | 3.0mm | |
| Chiedza Ruoko | 60*2.5*1200mm | |
| Anchor Bolt | 4-M16-600mm | |
| Flange | 280*280*14mm | |
| Surface Treatment | Kupisa dip kwakakurudzira+ Powder Coating | |
| Warranty | 20 Makore |
Nyora meseji yako pano uye titumire kwatiri
